# FORMAT VERSION 1.1
# SITE NAME Alonnah 730/181
# SURVEY MARK 730/181
# OBSERVERS N Bowden D Boyer
# LATITUDE -43.317844259
# LONGITUDE 147.242370903
# EASTING 519653.123
# NORTHING 5203859.638
# HORIZONTAL DATUM GDA94
# UTM ZONE 55
# VERTICAL DATUM AHD
# START DATE/TIME 2019/07/03       
# END DATE/TIME 2019/07/03       
# TIME ZONE HOURS 10
# TRUE BEARING TRANSECT DEGREES 265
# SURVEY METHOD Total station	
# INSTRUMENT DESCRIPTION Topcon GTS-303
# LEVEL MISCLOSURE MM 0
# CREATION DATE 2019/07/16
#
#	
# COLUMN 1 Horizontal distance from survey mark (m)
# COLUMN 2 Vertical height above datum (m)
# COLUMN 3 how-to-use flag (2 = use columns 1 and 2 (i.e. a levelling
#                               measurement),
#                           1 = use column 1 only (i.e. a tape measurement 
#                               or a comment)
#                           0 = don't use data(i.e. erroneous data))
# COLUMN 4 etc. any comments on this location (words separated by spaces;
# if more than one word, all comment enclosed in quotes)
#
# The perceived high water mark is indicated as follows:
#
# <Start of line> <horizontal distance> <vertical height> 2 HWM
#
# 730/133 is an aluminuim pin and a stainless steel washer in the top of 
# a low concrete wall.
# Coordinates of 730/133 determined by rapid static GPS on 03/07/2019.
# Coordinate origin: 181/7 519583.789E 5204448.550N 2.42AHD
# 
0.00 5.23 2 730/181
0.1  4.33 2 2
1.53 4.02 2 3
2.34 3.71 2 4
2.62 2.74 2 5
3.71 2.11 2 6
4.53 1.87 2 7
5.16 1.28 2 8
7.72 0.76 2 9
12.90 0.34 2 9
23.2 -0.04 2 10