# FORMAT VERSION 1.1
# SITE NAME Freers Beach 730/1340
# SURVEY MARK 730/1340
# OBSERVERS N Bowden
# LATITUDE -41.154955264
# LONGITUDE 146.541516546
# EASTING 461531.230
# NORTHING 5443939.910
# HORIZONTAL DATUM GDA94
# UTM ZONE 55
# VERTICAL DATUM AHD
# START DATE/TIME 2013/05/20
# END DATE/TIME 2013/05/20
# TIME ZONE HOURS 10
# TRUE BEARING TRANSECT DEGREES 60
# SURVEY METHOD RTK GPS
# INSTRUMENT DESCRIPTION Trimble R8
# LEVEL MISCLOSURE MM 
# CREATION DATE 2013/10/11
#
#	
# COLUMN 1 Horizontal distance from survey mark (m)
# COLUMN 2 Vertical height above datum (m)
# COLUMN 3 how-to-use flag (2 = use columns 1 and 2 (i.e. a levelling
#                               measurement),
#                           1 = use column 1 only (i.e. a tape measurement 
#                               or a comment)
#                           0 = don't use data(i.e. erroneous data))
# COLUMN 4 etc. any comments on this location (words separated by spaces;
# if more than one word, all comment enclosed in quotes)
#
# The perceived high water mark is indicated as follows:
#
# <Start of line> <horizontal distance> <vertical height> 2 HWM
#
# 730/1340 is an aluminuim pin and a stainless steel washer in the concrete base of a seat.
# Coordinates of 730/1350 determined by RTK GPS using the TASPOS base station network
# SPM 8423 AHD(Tas) 2.891 adopted as height origin.
# 
0	2.72	2	730/1340
0.1     2.72    2
3.78	2.795	2	134/4
5.43	2.776	2	134/5
7.64	1.558	2	134/6
13.2	1.389	2	134/7
17.26	1.013	2	134/8
48.68	0.605	2	134/9