# FORMAT VERSION 1.1
# SITE NAME Raspins Beach South
# SURVEY MARK 730/107
# OBSERVERS GW NT
# LATITUDE -42.550635695
# LONGITUDE 147.883301654
# EASTING 572519.143
# NORTHING 5288706.348
# HORIZONTAL DATUM GDA94
# UTM ZONE 55
# VERTICAL DATUM AHD
# START DATE/TIME 2015/05/16 11:45
# END DATE/TIME 2015/05/16 12:00
# TIME ZONE HOURS 10
# TRUE BEARING TRANSECT DEGREES 115
# SURVEY METHOD Levelling
# INSTRUMENT DESCRIPTION Leica NA720       
# LEVEL MISCLOSURE MM 10
# CREATION DATE 2016/02/13
#
#	
# COLUMN 1 Horizontal distance from survey mark (m)
# COLUMN 2 Vertical height above datum (m)
# COLUMN 3 how-to-use flag (2 = use columns 1 and 2 (i.e. a levelling
#                               measurement),
#                           1 = use column 1 only (i.e. a tape measurement 
#                               or a comment)
#                           0 = don't use data(i.e. erroneous data))
# COLUMN 4 etc. any comments on this location (words separated by spaces;
# if more than one word, all comment enclosed in quotes)
#
# The perceived high water mark is indicated as follows:
#
# <Start of line> <horizontal distance> <vertical height> 2 HWM
#
# 730/107 is a stainless steel screw in the top of a treated pine post.
# Coordinates of 730/107 derived by traverse on 06/02/2012
# Coordinate origin: SPM9913 572632.195E 5288923.383N 1.5418AHD
# 
# Did not put the plot of this data on the web page because it does not match
# plot of 14/06/2014.  Hope to re-measure in June 2015
#
0.000	2.266	2	730/107
5.13    1.37    2
11.20   1.48    2
13.30   1.79	2	
16.00   1.44	2	
21.10   1.24    2
24.60   1.18    2
38.3    0.22    2